PW8001

Manufacturer:

DC, 0.1 Hz to 5 MHz, 3-phase 4-wire, High Precision Power Analyzer for Motor and Inverter Efficiency Analysis

Basic specifications

Accuracy guaranteed: 6 months, Accuracy guarantee period after adjustment made by Hioki: 6 months

Measurement lines:
1-phase-2-wire, 1-phase-3-wire, 3-phase-3-wire, 3-phase-4-wire

No. of PW8001 input units:
Max. 8 units (mix and match)

Type of input unit:
U7001: 2.5 MHz, 16-bit
U7005: 15 MHz, 18-bit

Data update rate:
10 ms, 50 ms, 200 ms

Accuracy for power (U7001):
50/60 Hz: 0.02% of reading + 0.05% of range
DC: 0.02% of reading + 0.05% of range
50 kHz : 0.4% of reading + 0.1% of range

Accuracy for power (U7005):
50/60 Hz : 0.01% of reading + 0.02% of range
DC : 0.02% + 0.03% of reading of range
50 kHz: 0.15% of reading + 0.05% of range

Measurement range:
Voltage: 6 V, 15 V, 30 V, 60 V, 150 V, 300 V, 600 V, 1500 V
Current: (probe1) 100 mA to 2 kA, (probe2) 100 mA to 50 kA
(Range configuration changes depending on the current sensor used, U7001 only for Probe2.)

Measurement parameters:

voltage (U), current (I), active power (P), apparent power (S), reactive power(Q), power factor (λ), phase angle (φ), voltage frequency(fU), current frequency(fI), efficiency (η), loss (Loss), voltage ripple factor (Urf), current ripple factor (Irf), current integration (Ih), power integration (WP), voltage peak (Upk), current peak (Ipk)

– Harmonics measurement: maximum analysis order 500th
– Waveform recording: recording capacity 5M words × ( [voltage/current] ) × – No. of channels + motor waveforms)
– Motor analysis (option): voltage, torque, RPM, frequency, slip, motor power
– FFT analysis*
– Flicker measurement*

Calculation function:
Efficiency and loss calculations, User-defined calculations*, Delta conversion, Current sensor automatic phase shift calculation

External interface:
USB flash drive, LAN, GP-IB, RS-232C, external control, optical link*, BNC sync.*, CAN or CAN FD*

Power supply:
100 V to 240 V AC, 50/60 Hz, 230 VA

Dimensions and mass:
Approx. 430 mm (16.93 in) W × 221 mm (8.70 in) H × 361mm (14.21 in) D, Approx. 14kg (493.84 oz)

Accessories:
– Power cord ×1
– Instruction Manual ×1
– GENNECT One (PC applications) CD ×1
– D-sub 25-pin connector ×1 (PW8001-02, -05, -12, -15 only)

*To be supported in Ver. 2.00

Video

Files

Technical Data Sheet