Electromagnetic Compatibility Testing Equipment (EMC)
compact nx5 – conducted immunity
Manufacturer: AMETEK
Compact NX5 – Compact Tester for EFT/Burst, Surge and PowerFail
The compact Next Generation NX5 is the most versatile tester to address transient and power fail requirements for both international and commercial standards.
UCS 200N50 – conducted immunity
Manufacturer: AMETEK
The EM Test UCS 200N50 Automotive Transient Generator unifies the capabilities of an EFT/Burst simulator, a Micropulse simulator and the required coupling network into one box
DITO – conducted immunity
Manufacturer: AMETEK
dito is the most advanced ESD tester to simulate ESD pulses as per EN/IEC 61000-4-2 and other standards requirements
ESD NX 30 – conducted immunity
Manufacturer: AMETEK
esd NX30 is an ESD tester to simulate ESD pulses at higher voltages up to 30 kV in both air and contact discharge mode
CWS 500N3 – conducted immunity
Manufacturer: AMETEK
Key applications of the CWS 500N3 are in the automotive and aerospace area. Various international standards and MIL requirements call for magnetic field tests in the low frequency range
CWS 500N2.3 – Amplifiers
Manufacturer: AMETEK
Bulk Current Injection (BCI) is a test procedure to proof the immunity to electrical disturbances with narrowband electromagnetic energy
NSG 4070B series – radiated immunity
Manufacturer: AMETEK
The NSG 4070 is a multi-functional device for carrying out EMC immunity tests to accompany development and conformity testing in accordance to IEC / EN 61000-4-6,
NSG 3150 – conducted immunity
Manufacturer: AMETEK
Single function generator for Surge Combination Wave pulses for immunity testing in compliance with IEC 61000-4-5 up to 15 kV.
NSG 4060 – radiated immunity
Manufacturer: AMETEK
The NSG 4060 is an EMC immunity test system for the frequency range 15 Hz to 150 kHz. It consists of a sine wave generator, power amplifier, EUT monitoring interfaces and different coupling units
ECOMPACT4
Manufacturer: Haefely EMC
Integrated compact device for performing EFT / BURST reliability tests, this system combines all the good features of independent test systems, into one solution system
AXOS5
Manufacturer: Haefely EMC
A new generation of a compact test system, with a large and easy-to-use touch screen, for performing EFT / BURST reliability tests, with a breakdown voltage of 5KV, the ability to combine AC / DC cycle wave with interruptions and falls
ONYX electrostatic discharge esd simulator
Manufacturer: Haefely EMC
ESD simulator gun in 16KV / 30KV voltage ranges, the standalone gun without wires and cables for comfortable and easy work, comfortable touch screen in the direction of desired voltage settings
AXOS8
Manufacturer: Haefely EMC
A new generation of a compact test system, with a large and easy-to-use touch screen, for performing EFT / BURST reliability tests, with a breaking voltage of 7KV, the ability to combine AC / DC cycle wave with interruptions and falls
Anechoic cells to prevent external noise
Manufacturer: Haefely EMC
Compact and inexpensive cells or systems include rooms for performing preliminary measurements to the standard, can be ordered with a wide range of connectors according to customer requirements, all the connections required for power supply, communication, and data reading
GKT-008
Manufacturer: gwinstek
GKT-008 EMI Near Field Probe Set comprises four probes, including PR-01, PR-02, ANT-04, and ANT-05
GLN-5040A
Manufacturer: gwinstek
Two Line V-Network
GLN-5040A Two-Line V-Network(LISN) that met CISPR16-1-2:2006 standard is a required product for EMI conduction testing
GIT-5060
Manufacturer: gwinstek
Before connecting LISN, users can connect a GIT-5060 isolated transformer as the following diagram to balance grounding L and N phase current by ELCB function in order to realize a safe grounding
GPL5-5010
Manufacturer: gwinstek
Transient Limiter
Why do you need a transient limiter?
