DCS-9700 Osciliscope Series 70MHz – 300MHz 2017-11-19T10:49:00+00:00

DCS-9700 Osciliscope Series 70MHz – 300MHz


Oscilloscope DCS-9700 Series, as good as Agilent DSO or Tektronix TDS or TPS those are more popular in our market, we offer more performance more warranty in less money!

2GSa/s Real-time Sampling Rate and up to 300MHz Bandwidth

DCS-9700A Series Digital Storage Oscilloscope offers 2 and 4-channel configurations and wide bandwidth selections, including 300MHz, 200MHz, 100MHz and 70MHz. Each model provides 2GSa/s maximum real-time sampling rate and 100GSa/s high-speed equivalent-time sampling rate. Equipped with an 8-inch 800 x 600 high-resolution TFT LCD display, 1mV/div to 10V/div vertical range and 1ns/div to 100s/div time base, the DCS-9700A Series is able to faithfully demonstrate waveforms of complicated and obscure signals.

New with 2Mb Point Record Length, Waveform Search and Segmented Memory Functions

The DCS-9700A Series provides 2Mega point record length, and Waveform Search and Segmented Memory functions as standard features. The events of interest can be captured and saved into the Segmented Memory, which can be divided into 2048 sections, for observation, while the irrelevant waveforms can be ignored. Consequently, the overall efficiency of memory usage can be enhanced. Under Waveform Search mode, after the input signal is triggered, the DCS-9700A Series is able to Search and Mark the waveform sections, which comply with user-defined search condition and threshold level within the whole memory. Meanwhile, with Zoom window and Play/Pause button to scroll through whole displayed waveform, the user can rapidly navigate all the waveforms in an efficient way.

80,000 wfm/s Waveform Update Rate and VPO Technique

The waveform update rate of 80,000wfm/s enables users to accurately acquire and examine inrush signals and elusive glitches without missing any detail. Attributed to the advanced signal processing technique, VPO (Visual Persistence Oscilloscope), the grayscale display of waveforms shown on DCS-9700A distinguishes the signals from one another according to their occurrence frequencies respectively.

Upgrade to Mixed Signal Oscilloscope (MSO)

The DCS-9700A series provides the flexibility of easy conversion from a DSO into a MSO (Mixed Signal Oscilloscope) under a plug-and-play concept. As two plug-in compartments are available at the rear panel to accommodate various plug-in modules, the GDS-2000A series DSO with an 8 or 16 digital channels module performs MSO functions perfectly at the user’s installation of the module. The analysis and decoding functions of parallel bus and serial bus such as I2C, SPI, and UART are supported after the module is installed. DCS-9700A is regarded as an effective tool in signal analysis, trouble diagnosis and debug.

Function Generator Option

The plug-in module of DDS (Direct Digital Synthesis) based function generator is provided as an option of the DCS-9700A series. The function generator is able to generate Sine, Triangle and Square waveforms, with variable duty cycle of the square waveform. Two function generators can be used at the same time to provide dual output signals. With the stimulus source, the verification of electrical characteristics and functionality of the DUT (Device Under Test) can be done in one DSO.

קבצים מצורפים


dcs-9700-series-manual PDF

dcs-9700-series-dcs9700 catalog

dcs-9700-series-dcs9700 catalog PDF
DCS-9700 Series
צור קשר
לפרטים ולהצעת מחיר צור קשר